How To: Jailbreak iPhone 4, iPhone 3GS, iPod Touch 4G On iOS 6 Tethered With RedSn0w 0.9.15b1 [Windows]

The official tethered iOS 6 Jailbreaking solution has finally arrived in the form of RedSn0w v0.9.15b1. The iPhone Dev-Team worked extremely hard to update RedSn0w to be compatible with iOS 6, and the fruits of their labour have without a doubt paid off.

If you remember correctly, our previous method we showed you for Jailbreaking the iOS 6 firmware tethered that involved manually installing an unstable version of Cydia, this new method involving RedSn0w v0.9.15b1 is as stable as it gets and does not require the manual installation of Cydia. As such, in this tutorial you will learn how to Jailbreak your A4 iPhone or iPod Touch tethered running the iOS 6 firmware with the Windows version of RedSn0w v0.9.15b1.

Note: For a Mac OS X version of this tutorial please click here.

Supported Devices Include

  • iPhone 4 CDMA
  • iPhone 4 GSM
  • iPhone 3GS (Untethered Jailbreak if old-bootrom)
  • iPod Touch 4G

RedSn0w v0.9.15b1 iOS 6 Jailbreak Tutorial

Step 1) The first thing you will need to do is download RedSn0w v0.9.15b1 for the Windows operating system using the download mirror below or through the iJailbreak Downloads Section.

Download RedSn0w v0.9.15b1 (Windows)

Step 2) Once you have downloaded RedSn0w v0.9.15b1 you will need to extract it by right clicking on the zip file and then clicking the extract to folder option.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

When RedSn0w has been extracted find the redsn0w.exe file, right click on it and click the Run as administrator option (if applicable).

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Step 3) With RedSn0w up and running you will need to simply click the Jailbreak button.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Step 4) Once you click the Jailbreak button you will be presented a screen with preparation instructions for entering DFU mode. Read through these instructions, power off your iPhone or iPod Touch if you haven’t already, and then click the Next button.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Once you click the Next button you will need to execute the steps shown on-screen, which are:

  • Hold down Power (corner) button for 5 seconds.
  • Without releasing the Power button, also hold down the Home (bottom center) button along with the Power button for 10 seconds.
  • Without releasing the home button, stop holding down the power button for up to 15 seconds.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Step 5) After you have entered DFU mode, RedSn0w will begin processing the iOS 6 firmware.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

When the firmware has been processed you will come to a screen with a few options for your Jailbreak. Ensure that the “Install Cydia” option is checked, and then click the Next button to begin the actual Jailbreaking process. 

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Step 6) RedSn0w will now begin jailbreaking your iPhone or iPod Touch. DO NOT interrupt or use the computer during this time. When the iOS device is finished being jailbroken it will reboot into a non-Jailbroken state (or in some cases will not make it past the Apple logo). This is because you have a tethered Jailbreak and will need to boot it using RedSn0w.

Step 7) Launch RedSn0w again if you exited out of it, click the Extras button and then click the Just Boot button. You will now need to put the iPhone or iPod Touch into DFU mode again. Once your iOS device is in DFU mode it will boot into a Jailbroken state.

Redsn0w 0.9.15b1 Windows iOS 6 Jailbreak Tutorial

Note: Remember that you will need to repeat Step 7 every time your iPhone or iPod Touch loses power.

That wasn’t so bad was it? Your iPhone 4, iPhone 3GS or iPod Touch 4G should now be Jailbroken tethered on the iOS 6 firmware generation. Congratulations! All that you need to do now is launch Cydia and begin installing your favourite tweaks. If you have any further questions or thoughts please drop us a line in the comments.

Don't forget to follow iJailbreak.com on Facebook, Twitter and Google+. Be sure to check out our partnership page where you can get mentorship on starting your own business online.
  • danie awde

    since its hactivate why its shows me no service

  • Mindaugas

    me to…what is solution?

  • cosmin

    thx:X:X:X:D

  • Silversus343

    Try installing ultrasnow if your iPhone isn’t unlocked.

  • dickhead

    I think you didn’t preserved your BB while upgrading to iOS6, what you need is a sim unlock like ultrasnow but not functional for iOS6′s BB at the time being… sorry dude you’re locked up even downgrading firmware does’nt downgrade BB…

  • salem

    Hello: I did the above steps as mentioned and couple of times, but Cydia didnt install! Anyone can help??? My device is Iphone 4

  • jodi

    i don’t know how can bring the cydia . i did the jailbreak good but i don’t the

  • Jack

    Remember ultrasnow is only to unnetwork locked phones. But if it says no service good chance that it is network locked but make sure as ultra snow can ruin your push notifications

  • ard

    i did every step but it doesn’t install cydia! please help!!!

  • Msbadluckpenny

    So there isnt a jailbreak for iphone 4S yet thats running IOS 6 is that correct?

  • idk

    Once I click jailbreak and install Cydia, it comes with the Pinapple guy, but it gets stuck on Moving Applications forever

  • idk

    Same for me :L

  • Karen

    Is it really long to process build? because i am stuck on it…. :/

  • nack

    this is fucking hard to download

  • AhmAr

    After readinG all theSe Comments i am AfraiD tO update my iphOne 3Gs ……..
    i was very exiteD tO see this tutOrial but after i have read All these disapointments i am realy gOna Cry nOw :( :’(

    iF sOme buDDy help me Out in this upgrade prOgress plZzZz help me

    ( LibraS_Alone09@yahoo.com ) my f.b i.D