How To: Jailbreak iOS 5.1 Tethered On First-Generation iPad Using RedSn0w 0.9.10b6 [Windows]

Apple released the iOS 5.1 firmware update yesterday for the iPad 1G and iPad 2G. If you are looking to Jailbreak the iOS 5.1 firmware you will be glad to know the iPhone Dev-Team have rolled out an update for RedSn0w to Jailbreak the iOS 5.1 firmware. Although you can Jailbreak the iOS 5.1 firmware there are some things you need to keep in mind.

Firstly, this Jailbreak is only for the first generation iPad. Secondly, this is a tethered Jailbreak and not an untethered Jailbreak that we have been very lucky to have on the iOS 5.0.1 firmware. As this is a tethered Jailbreak it means you will need to plug your iPad into your computer and re-run RedSn0w to boot your iPad into a fully operational state every time it loses power. Lastly, iBooks will not work on the iOS 5.1 firmware until the iPhone Dev-Team have had a chance to implement a patch.

If you understand the three points I have just brought up about this Jailbreak and meet the requirements you will be able to easily Jailbreak your first generation iPad on iOS 5.1 tethered. And in this how to guide from iJailbreak.com you will learn how to do just this using the Windows version of RedSn0w 0.9.10b6.

Note #1: This is a tethered Jailbreak and will not work with the iPad 2.

Note #2: iBooks will not function correctly until the iPhone Dev-Team have had a chance to implement a patch.

Note #3: If you are looking to Jailbreak your iPhone 4 or iPhone 3GS click here. If you would like toJailbreak your iPod Touch 4G or iPod Touch 3G click here.

Jailbreak iOS 5.1 Tethered (Windows)

Step 1) – The first thing you will need to do is download RedSn0w 0.9.10b6 for the Windows operating system using the download mirror below or through the iJailbreak Downloads Section.

Download RedSn0w 0.9.10b6 for Windows

Step 2) – Once you have downloaded RedSn0w you will need to extract it to your desktop by right clicking on the RedSn0w.zip file and then clicking the extract to folder option.

RedSn0w 0.9.10b6 Windows

Step 3) – Next you will need to launch RedSn0w by right clicking on the redsn0w.exe shortcut and then clicking the run in administrator mode option.

RedSn0w 0.9.10b6 Windows

Step 4) – With RedSn0w running you will need to click the Jailbreak button.

RedSn0w 0.9.10b6 Windows

Step 5) – After clicking the Jailbreak button you will come to a screen where you will need to put your iPad into DFU mode.

RedSn0w 0.9.10b6 Windows

Read through and follow the instructions presented to you which is to plug in and power off your iPad and then click the next button when you are ready to begin the DFU mode process.

Step 6) – When you click the next button you will need to follow the instructions presented to you in real-time to put your iPad into DFU mode.

  • Hold down Power (corner) button for 5 seconds.
  • Without releasing the Power button, also hold down the Home (bottom center) button along with the Power button for 10 seconds.
  • Without releasing the home button, stop holding down the power button for up to 15 seconds.
RedSn0w 0.9.10b6 Windows
RedSn0w 0.9.10b6 Windows
RedSn0w 0.9.10b6 Windows

Step 7) – After you successfully enter DFU mode RedSn0w 0.9.10b6 will begin preparing your iPad for the iOS 5.1 Jailbreak.

RedSn0w 0.9.10b6 Windows

Step 8 ) - Once RedSn0w has finished preparing your iPad for the iOS 5.1 Jailbreak you will be asked you to specify options to go along with your Jailbreak. The only option that you actually need to make sure is checked is the Install Cydia option. Once you have ensured this option is checked, and any other options you may want, click the Next button.

RedSn0w 0.9.10b6 Windows

Step 9) - After you have specified your Jailbreak options you can click the next button and RedSn0w 0.9.10b6 will begin jailbreaking your iPad. DO NOT interrupt or use the computer during this time. When your iPad is finished being jailbroken it will boot up with the Apple logo and not go any further. This is because this is a tethered Jailbreak and you will need to boot tethered with RedSn0w in order to get your iPad in a working state again.

Step 10) – As explained previously when you Jailbreak your iPad running iOS 5.1 you will have a tethered Jailbreak. Meaning in order for your iPad to turn back on you will need to boot it using RedSn0w (this applies every time your iPad loses power). To do this launch RedSn0w again and click the Extras Button > then click the Just boot button and you will simply need to put your iPad into DFU mode again.

RedSn0w 0.9.10b6 Windows

Voila! You should now have a tethered Jailbreak on your first generation iPad running the iOS 5.1 firmware. For more tutorials visit the How To Jailbreak Section. Leave any questions in the comments below.

Don't forget to follow iJailbreak.com on Facebook, Twitter and Google+.
  • Somepicture

    i cant use for iphone 4s ios 5.1

  • Chong-yee_ronnie

    Does it work with ipad2?

  • Haroon_lf2009

    Mind blowing keep it guyyyyyyyyyyyyyyyyyyyy

    Thankkkkkkkkkkkkkkkkkkkkkkksssssssssssssssssssssssssss
    Haroon khan